Made new file for move2goal()

Code/Control/Laptop_Code/main.py

@@ -137,50 +137,8 @@ def move2goal(tx, ty):
         pwm1, pwm2, pwm3, pwm4
         dir1, dir2, dir3, dir4
     """    
-    inputx = tx / 1.00
-    inputy = ty / 1.00
-
-    # April Tag Center
-    setpoint_x = 160
-    setpoint_y = 120
-    
-    pid_x = PID(kdx,kix,kpx,setpoint = setpoint_x)
-    pid_y = PID(kdy,kiy,kpy,setpoint = setpoint_y)
-    
-    pid_x.auto_mode = True
-    pid_x.set_auto_mode(True, last_output = 8.0)
-    pid_x.output_limits = (-255,255)
-    pid_y.output_limits = (-255,255)
-    
-    outputx = pid_x(inputx)
-    outputy = pid_y(inputy)
-    
-    # Vertical
-    pwm1 = abs(outputy)
-    pwm2 = abs(outputy)
-    
-    if(outputy > 0):
-        dir1 = '+'
-        dir2 = '+'
-    else:
-        dir1 = '-'
-        dir2 = '-'
-    
-    # Horizontal
-    lspeed = -1 * outputx + base_speed
-    rspeed =  1 * outputx + base_speed
-    pwm3 = abs(lspeed)
-    pwm4 = abs(rspeed)
-    if (lspeed > 0):
-        dir3 = '+'
-    else:
-        dir3 = '-'
-    if (rspeed > 0):
-        dir4 = '+'
-    else:
-        dir4 = '-'
-    
-    return int(pwm1), int(pwm2), int(pwm3), int(pwm4), dir1, dir2, dir3, dir4
+    pass
+    # return int(pwm1), int(pwm2), int(pwm3), int(pwm4), dir1, dir2, dir3, dir4
     
 
 def seeking():

Code/Control/Laptop_Code/main_aaron_move2goal.py

+import time
+import serial
+import ball_detection.ball_detection as ball_detection
+import simple_pid.PID as PID
+
+from constants import *
+
+# ========= Serial Port I/O ===========
+
+def serial_port_in(serial_port):
+    '''
+    Description:
+        Take all ESP32_Master serial port's printIn and take all necessary input object
+
+    Input:
+        serial_port     :    serial.Serail object
+
+    Output:
+        tx, ty, tz, rx, ry, rz, LIDAR_dist, DebugM
+    '''
+
+    # DEBUG Verbose
+    print("initiating one round of serial in ...")
+
+    for i in range(7):
+        line = serial_port.readline()
+        val = int(line.decode())
+
+        if   i == 0:
+            tx = val
+        elif i == 1:
+            ty = val
+        elif i == 2:
+            tz = val
+        elif i == 3:
+            rx = val
+        elif i == 4:
+            ry = val
+        elif i == 5:
+            rz = val
+        elif i == 6:
+            LIDAR_dist = val
+
+    line = serial_port.readline()
+    debugM = line.decode()
+
+    # DEBUG Verbose
+    print("tx:{}".format(tx))
+    print("ty:{}".format(ty))
+    print("tz:{}".format(tz))
+    print("rx:{}".format(rx))
+    print("ry:{}".format(ry))
+    print("rz:{}".format(rz))
+    print("dist:{}".format(LIDAR_dist))
+    print(debugM)
+
+    return tx, ty, tz, rx, ry, rz, LIDAR_dist, debugM
+
+
+def serial_port_out(serial_port, pwm1, pwm2, pwm3, pwm4, dir1, dir2, dir3, dir4):
+    '''
+    Description:
+        Feed to ESP32_Master to send ESP32_Slave necessary information
+        the format of sending is pwm are 3 digit space
+
+    Input:
+        serial_port                                     :   serial.Serail object
+        pwm1, pwm2, pwm3, pwm4, dir1, dir2, dir3, dir4  :   variables to send
+
+    Output:
+        None
+    '''
+    output_message = ''
+
+    for pwm_itr in [pwm1, pwm2, pwm3, pwm4]:
+        print(pwm_itr)
+        if len(str(pwm_itr)) == 2:
+            output_message += '0'
+        elif len(str(pwm_itr)) == 1:
+            output_message += '00'
+        output_message += str(pwm_itr)
+
+    output_message = output_message + dir1 + dir2 +  dir3 +  dir4 + '\n'
+    serial_port.write(output_message.encode())
+
+    # DEBUG Verbose
+    print("serial out ...")
+    print(output_message)
+
+
+# ====== Logic-directing Functions ====
+def ball_detect(gbx, gby):
+    '''
+    return True if green ball is detected
+    '''
+    if gbx == -1 and gby == -1:
+        return False
+    else:
+        return True
+
+def goal_detect(tx,ty):
+    '''
+    return True if April Tag is detected
+    '''
+    if tx == 0 and ty == 0:
+        return False
+    else:
+        return True
+
+def ball_capture(LIDAR_dist):
+    '''
+    return True if April Tag is detected
+    '''
+    if (LIDAR_dist < LIDAR_Thres) and (LIDAR_dist > 0):  # Ball captured
+        return True
+    else:
+        return False
+
+# ======= Motion-based Functions ======
+def stop_all():
+    pwm1, pwm2, pwm3, pwm4 = 0 , 0 , 0 , 0
+    dir1, dir2, dir3, dir4 = '+', '-', '+', '-'
+    return pwm1, pwm2, pwm3, pwm4, dir1, dir2, dir3, dir4
+
+
+def move2goal(tx, ty):
+    """
+    Description:
+        Given the center of the AT tx, ty. Call PID control to output the blimp
+        motor to manuver to the goal
+
+    Input:
+        tx    :    x component, center of April Tag
+        ty    :    y component, center of Aprol Tag
+
+    Output:
+        pwm1, pwm2, pwm3, pwm4
+        dir1, dir2, dir3, dir4
+    """    
+    inputx = tx / 1.00
+    inputy = ty / 1.00
+
+    # April Tag Center
+    setpoint_x = 160
+    setpoint_y = 120
+    
+    pid_x = PID(kdx,kix,kpx,setpoint = setpoint_x)
+    pid_y = PID(kdy,kiy,kpy,setpoint = setpoint_y)
+    
+    pid_x.auto_mode = True
+    pid_x.set_auto_mode(True, last_output = 8.0)
+    pid_x.output_limits = (-255,255)
+    pid_y.output_limits = (-255,255)
+    
+    outputx = pid_x(inputx)
+    outputy = pid_y(inputy)
+    
+    # Vertical
+    pwm1 = abs(outputy)
+    pwm2 = abs(outputy)
+    
+    if(outputy > 0):
+        dir1 = '+'
+        dir2 = '+'
+    else:
+        dir1 = '-'
+        dir2 = '-'
+    
+    # Horizontal
+    lspeed = -1 * outputx + base_speed
+    rspeed =  1 * outputx + base_speed
+    pwm3 = abs(lspeed)
+    pwm4 = abs(rspeed)
+    if (lspeed > 0):
+        dir3 = '+'
+    else:
+        dir3 = '-'
+    if (rspeed > 0):
+        dir4 = '+'
+    else:
+        dir4 = '-'
+    
+    return int(pwm1), int(pwm2), int(pwm3), int(pwm4), dir1, dir2, dir3, dir4
+    
+
+def seeking():
+    """
+    Description:
+        By default, when there ball is not determined capture, the manuver of the
+        motors to have it scan its surronding 360 degrees
+
+    Input:
+        none
+
+    Output:
+        pwm1, pwm2, pwm3, pwm4
+        dir1, dir2, dir3, dir4
+    """
+    pwm1, pwm2, pwm3, pwm4 = 0 , 0 , seeking_speed , seeking_speed
+    dir1, dir2, dir3, dir4 = '+', '+', '+', '-'
+
+    return int(pwm1), int(pwm2), int(pwm3), int(pwm4), dir1, dir2, dir3, dir4
+
+def move2ball(gbx,gby,gb_dist):
+    """
+    Description:
+        Given the center of x y dist of green ball detected. Call PID control to
+        output the blimp motor to manuver to the green ball
+
+    Input:
+        gbx     :  x component, center of green ball
+        gby     :  y component, center of green ball
+        gb_dist :  distance to green ball
+
+    Output:
+        pwm1, pwm2, pwm3, pwm4
+        dir1, dir2, dir3, dir4
+    """
+    inputx = gbx / 1.00
+    inputy = gby / 1.00
+
+    # ESP-Cam Center
+    setpoint_x = 400
+    setpoint_y = 300
+    
+    pid_x = PID(kdx,kix,kpx,setpoint = setpoint_x)
+    pid_y = PID(kdy,kiy,kpy,setpoint = setpoint_y)
+    
+    pid_x.auto_mode = True
+    pid_x.set_auto_mode(True, last_output = 8.0)
+    pid_x.output_limits = (-255,255)
+    pid_y.output_limits = (-255,255)
+    
+    outputx = pid_x(inputx)
+    outputy = pid_y(inputy)
+    
+    # Vertical
+    pwm1 = abs(outputy)
+    pwm2 = abs(outputy)
+    
+    if(outputy > 0):
+        dir1 = '+'
+        dir2 = '+'
+    else:
+        dir1 = '-'
+        dir2 = '-'
+    
+    # Horizontal
+    lspeed = -1 * outputx + base_speed
+    rspeed =  1 * outputx + base_speed
+    pwm3 = abs(lspeed)
+    pwm4 = abs(rspeed)
+    if (lspeed > 0):
+        dir3 = '+'
+    else:
+        dir3 = '-'
+    if (rspeed > 0):
+        dir4 = '+'
+    else:
+        dir4 = '-'
+    
+    return int(pwm1), int(pwm2), int(pwm3), int(pwm4), dir1, dir2, dir3, dir4
+
+
+#  =========== main control ===========
+
+def main_control(gbx, gby, gb_dist, tx, ty, tz, rx, ry, rz, LIDAR_dist, debugM):
+    '''
+    Description:
+        Given green ball information and AT information, the main control logic
+        to manuver the blimp motors
+
+    Input:
+        gbx, gby, gb_dist                   :   green ball information
+        tx, ty, tz, rx, ry, rz, LIDAR_dist  :   AirTag information
+        debugM                              :   Debug Message
+
+    Output:
+        pwm1, pwm2, pwm3, pwm4, dir1, dir2, dir3, dir4  :   Blimp motor manuver parameters
+    '''
+    # placeholder
+    pwm1, pwm2, pwm3, pwm4 = 0 , 0 , 0 , 0
+    dir1, dir2, dir3, dir4 = '+', '-', '+', '-'
+
+    ballDetect  = ball_detect(gbx, gby)
+    ballCapture = ball_capture(LIDAR_dist)
+    goalDetect  = goal_detect(tx,ty)
+
+    if ballCapture: # Ball captured
+        if goalDetect:  # Goal detected
+            pwm1, pwm2, pwm3, pwm4, dir1, dir2, dir3, dir4 = move2goal(tx, ty)
+        else:  # Goal not detectedpwm1, pwm2, pwm3, pwm4, dir1, dir2, dir3, dir4 =
+            pwm1, pwm2, pwm3, pwm4, dir1, dir2, dir3, dir4 = seeking()
+    else:  # Ball not captured
+        if ballDetect:  # Ball detected
+            pwm1, pwm2, pwm3, pwm4, dir1, dir2, dir3, dir4 = move2ball(gbx,gby,gb_dist)
+        else:  # Ball not detected
+            pwm1, pwm2, pwm3, pwm4, dir1, dir2, dir3, dir4 = seeking()
+
+    return pwm1, pwm2, pwm3, pwm4, dir1, dir2, dir3, dir4
+
+
+
+# ===== Main Functions =====
+
+if __name__ == '__main__':
+    # =========== SET UP ============
+    # Defining Variables for ESP 32 Serial I/O
+    PORT = "COM5" # for Alienware
+    serial_port = serial.Serial(PORT, 115200)
+    serial_port.close()
+    serial_port.open()
+
+    # Weit Time
+    waitTime = 0.10
+
+    # Loading the PyTorch ML model for ball detection
+    model = ball_detection.returnModel(device, labelSet, modelLoc, modelFile)
+
+    # =========== DECLARE VARIABLES ===========
+    # ESP CAM In
+    gbx, gby  = -1, -1   # by default (-1 means no found green ball)
+    gb_dist = -1         # by default (-1 means no found green ball)
+
+    # Serial Port In
+    tx, ty, tz = 0, 0, 0  # by default (0 means no found AirTag)
+    rx, ry, rz = 0, 0, 0
+    LIDAR_dist = 0
+    debugM = 'Testing'
+
+    # Serial Port Out
+    pwm1, pwm2, pwm3, pwm4 = 0 , 0 , 0 , 0   # Not moving
+    dir1, dir2, dir3, dir4 = '+', '+', '+', '+'
+
+    count = 0
+    # =========== LOOP FOREVER===========
+    while True:
+        gbx, gby, gb_dist = ball_detection.detectLive(model, minDetectionScore, showSight = True)
+        print("gbx, gby: {}, {}".format(gbx, gby))
+
+        line = serial_port.readline()
+        if line == b'SERIAL_IN_START\r\n':
+            # ===== STEP 1: TAKE ALL INPUT =====
+            tx, ty, tz, rx, ry, rz, LIDAR_dist, debugM = serial_port_in(serial_port)
+
+            # ===== STEP 2: MAIN CONTROL LOOP =====
+            pwm1, pwm2, pwm3, pwm4, dir1, dir2, dir3, dir4 = main_control(gbx, gby, gb_dist, tx, ty, tz, rx, ry, rz, LIDAR_dist, debugM)
+
+            # ===== STEP 3: FEED ALL OUTPUT =====
+            serial_port_out(serial_port, pwm1, pwm2, pwm3, pwm4, dir1, dir2, dir3, dir4)
+            
+            time.sleep(waitTime)
+
+        if count == 0:
+            # first time calling (call once)
+            pwm1, pwm2, pwm3, pwm4, dir1, dir2, dir3, dir4 = main_control(gbx, gby, gb_dist, tx, ty, tz, rx, ry, rz, LIDAR_dist, debugM)
+            serial_port_out(serial_port, pwm1, pwm2, pwm3, pwm4, dir1, dir2, dir3, dir4)
+            # count +=1
\ No newline at end of file