Compare revisions

31d63dd8 · 31d63dd8 · 31d63dd8 · 31d63dd8 · 31d63dd8 · 31d63dd8
--- a/developer_journal.md
+++ b/developer_journal.md
--- a/journal_media/contriA1.png
+++ b/journal_media/contriA1.png
--- a/journal_media/contriB1.png
+++ b/journal_media/contriB1.png
--- a/journal_media/contriC1.png
+++ b/journal_media/contriC1.png
--- a/journal_media/contriD1.png
+++ b/journal_media/contriD1.png
--- a/journal_media/demo_design.png
+++ b/journal_media/demo_design.png
--- a/journal_media/fab_process.png
+++ b/journal_media/fab_process.png
--- a/journal_media/fab_result.png
+++ b/journal_media/fab_result.png
--- a/journal_media/fig12-2.png
+++ b/journal_media/fig12-2.png
--- a/journal_media/final_pipline.png
+++ b/journal_media/final_pipline.png
--- a/journal_media/fully_folded_paperbot.png
+++ b/journal_media/fully_folded_paperbot.png
--- a/journal_media/paper_outline1.png
+++ b/journal_media/paper_outline1.png
--- a/journal_media/test_before_fullyfold.png
+++ b/journal_media/test_before_fullyfold.png
--- a/paperbot_ee_autoroute/dwg_for_autorouter.dxf
+++ b/paperbot_ee_autoroute/dwg_for_autorouter.dxf
--- a/paperbot_ee_autoroute/paperbot_ee.dsn
+++ b/paperbot_ee_autoroute/paperbot_ee.dsn
--- a/paperbot_ee_autoroute/paperbot_ee.rules
+++ b/paperbot_ee_autoroute/paperbot_ee.rules
-
-(rules PCB paperbot_ee
-  (snap_angle 
-    fortyfive_degree
-  )
-  (autoroute_settings
-    (fanout off)
-    (autoroute on)
-    (postroute on)
-    (vias on)
-    (via_costs 50)
-    (plane_via_costs 5)
-    (start_ripup_costs 100)
-    (start_pass_no 60)
-    (layer_rule F.Cu
-      (active on)
-      (preferred_direction vertical)
-      (preferred_direction_trace_costs 1.0)
-      (against_preferred_direction_trace_costs 2.3)
-    )
-  )
-  (rule
-    (width 2000.0)
-    (clear 200.0)
-    (clear 125.0 (type smd_to_turn_gap))
-    (clear 1000.2 (type default_smd))
-    (clear 1000.0 (type smd_smd))
-  )
-  (via_rule
-    default
-  )
-  (class default
-    3v3 GND NET1 NET2 SCL SDA
-    (clearance_class default)
-    (via_rule default)
-    (rule
-      (width 2000.0)
-    )
-    (circuit 
-      (use_layer F.Cu)
-    )
-  )
-)
\ No newline at end of file
No results found